Expro Excellence
Drilling Technologies Well Construction
HI TOOL® replaces 16” Near Bit Roller Reamer in vertical exploration well
Customer challenges
  • A Middle East operator sought a solution to achieving shoe to shoe single bit trips in long 16” sections
  • The Expro HI TOOL® (Harmonic Isolation Tool) was deployed in an exploration application while drilling vertically from the Ahmadi to the Mid Thamama (Yamama) formations, a mix of limestones, shales, sandstones and siltstones. Made up into the BHA above bit, the goal was to achieve shoe to shoe performance not seen on previous wells
Expro Excellence
  • To allow the roller cone bit to sit evenly on the formation face, undisturbed by the tilting action of the BHA above, the HI TOOL® was run near bit to decouple this motion
Value to client
  • In this well, with the HI TOOL® close to the bit, both axial and lateral vibrations were greatly reduced. This allowed the bit to sit flat on the well bore face, and for drilling to continue smoothly with normal parameters and a constant rate of penetration. The 2,080 ft section was drilled in a smooth manner with the roller cone TCI bit graded 1-5 WT
  • Reduction of lateral and axial vibrations
    Smooth drilling throughout section
    Noticeably quieter drilling on the rig floor
    Bit condition reflects worn teeth, and not TCI tooth breakage on roller cone
Contact

HI TOOL® replaces 16” Near Bit Roller Reamer in vertical exploration well

In Brief
HI TOOL® reduced lateral and axial vibrations
Product Line
  • Drilling Technologies
  • Well Construction
Region
Middle East And North Africa
Customer challenges
  • A Middle East operator sought a solution to achieving shoe to shoe single bit trips in long 16” sections
  • The Expro HI TOOL® (Harmonic Isolation Tool) was deployed in an exploration application while drilling vertically from the Ahmadi to the Mid Thamama (Yamama) formations, a mix of limestones, shales, sandstones and siltstones. Made up into the BHA above bit, the goal was to achieve shoe to shoe performance not seen on previous wells
Expro Excellence
  • To allow the roller cone bit to sit evenly on the formation face, undisturbed by the tilting action of the BHA above, the HI TOOL® was run near bit to decouple this motion
Value to client
  • In this well, with the HI TOOL® close to the bit, both axial and lateral vibrations were greatly reduced. This allowed the bit to sit flat on the well bore face, and for drilling to continue smoothly with normal parameters and a constant rate of penetration. The 2,080 ft section was drilled in a smooth manner with the roller cone TCI bit graded 1-5 WT
  • Reduction of lateral and axial vibrations
    Smooth drilling throughout section
    Noticeably quieter drilling on the rig floor
    Bit condition reflects worn teeth, and not TCI tooth breakage on roller cone
Contact

For further information, please contact:

wellconstruction@expro.com