Expro Excellence
Well Intervention and Integrity Cased Hole Services
Cut your NPT and wire with the Kinley K2-Cutter
Customer challenges
  • During a rig based well abandonment program, a Slickline toolstring had become stuck in a tubing stump downhole
  • After several hours of jarring, it was decided that recovering the wire in a controlled manner was the safest option versus continuing to jar and risk a wire break at surface or at an unpredicable depth downhole
  • Due the possibility of a cutter falling near the fish, a reliable method of crimping the cutter to the wire for recovery post-cut was required
  • The rig was on Non-Productive Time (NPT) until a solution could be found for the customer
Expro Excellence
  • Expro’s Kinley K2-Cutter was chosen due to the necessity for rapid deployment
  • The Kinley K2-Cutter has no explosives, no hydraulics and no lithium batteries, so it is easily transportable to any location, onshore, offshore or internationally
  • Explosive alternatives would have taken days to mobilize - the K2-Cutter was at the heliport within hours of the call-out
  • Full on-site operational checks were performed including a pre-deployment test cut, with the tool being reset and ready for deployment within minutes
  • The K2-Cutter’s robust crimping mechanism ensures tool recovery with the cut wire
Value to client
  • The K2-Cutter was deployed, a successful cut made at the rope socket and the tool crimped to the wire for recovery to surface
  • The wire was successfully recovered in less than 12 hours from the time the decision was made to stop jarring
  • The abandonment program was subsequently able to continue with minimal NPT
Contact

Cut your NPT and wire with the Kinley K2-Cutter

In Brief
The K2-Cutter was deployed, a successful cut made at the rope socket and the tool crimped to the wire for recovery to surface
Product Line
  • Well Intervention and Integrity
  • Cased Hole Services
Region
Europe and Sub Saharan Africa
Customer challenges
  • During a rig based well abandonment program, a Slickline toolstring had become stuck in a tubing stump downhole
  • After several hours of jarring, it was decided that recovering the wire in a controlled manner was the safest option versus continuing to jar and risk a wire break at surface or at an unpredicable depth downhole
  • Due the possibility of a cutter falling near the fish, a reliable method of crimping the cutter to the wire for recovery post-cut was required
  • The rig was on Non-Productive Time (NPT) until a solution could be found for the customer
Expro Excellence
  • Expro’s Kinley K2-Cutter was chosen due to the necessity for rapid deployment
  • The Kinley K2-Cutter has no explosives, no hydraulics and no lithium batteries, so it is easily transportable to any location, onshore, offshore or internationally
  • Explosive alternatives would have taken days to mobilize - the K2-Cutter was at the heliport within hours of the call-out
  • Full on-site operational checks were performed including a pre-deployment test cut, with the tool being reset and ready for deployment within minutes
  • The K2-Cutter’s robust crimping mechanism ensures tool recovery with the cut wire
Value to client
  • The K2-Cutter was deployed, a successful cut made at the rope socket and the tool crimped to the wire for recovery to surface
  • The wire was successfully recovered in less than 12 hours from the time the decision was made to stop jarring
  • The abandonment program was subsequently able to continue with minimal NPT
Contact

For further information, please contact:

wellintervention@expro.com